Langelier Saturation Index (LSI) Calculator

LSI calculator tool helps you determine the scaling potential of the pool water. Using this tool u can get the balancing level for corrosion scaling index point of a pool water.

Formula:

Saturation Index = pH + calchd + totak + tmpc - 12.1

Langelier Saturation Index Calculator:

---

Total Alkalinity:	Select Value 5 ppm 25 ppm 50 ppm 75 ppm 100 ppm 125 ppm 150 ppm 200 ppm 250 ppm 300 ppm 400 ppm 800 ppm 1000 ppm
Calcium Hardness:	Select Value 5 ppm 25 ppm 50 ppm 75 ppm 100 ppm 125 ppm 150 ppm 200 ppm 250 ppm 300 ppm 400 ppm 800 ppm 1000 ppm
Temperature:	Select Value 0 °C 3 °C 8 °C 12 °C 16 °C 19 °C 24 °C 25 °C 26 °C 27 °C 28 °C 29 °C 30 °C 31 °C 32 °C 33 °C 34 °C 35 °C 36 °C 37 °C 38 °C 39 °C 40 °C
Measured pH:
Langelier Saturation Index:

Interpreting the LSI:

• The ideal LSI value is 0, indicating that the water is perfectly balanced. If the SI value from the equation lies between +0.3 and – 0.3 then the water is also considered balanced and no adjustments are needed.

• Higher than +0.3 indicates the probability of the water to be scale-forming (over-saturated with minerals). The higher the LSI value, the greater the chance of scale formation.

• Lower than –0.3 indicates the probability of the water to be corrosive. The lower the SI value, the greater the danger of corrosion.

• Like pH, the LSI value is logarithmic, meaning that a difference of 1.0 equates to a difference of ten times in reality. A Saturation Index of -2.0 is ten times more corrosive than an SI of –1.0.